So, you’ve finally decided to get your ride that car paint protection film your neighbour has been talking about for the past month – a clear bra. This appears to be a wise decision – congratulations! These clear bra kits offer the best protection there is when it comes to first hand defence against daily hazards to your car paint’s safety. But, like most things they need to be maintained in order for them to function well – the clear bra is no exception to this. So, here are the 5 easy steps to maintaining your clear bra in Longwood, Florida.
Step 1: Completely Rinse Your Ride From Top to Bottom
When it comes to cleaning this clear protective film you’ve fancied for your dream ride, it’s not actually that hard. In fact, you might find the early stages particularly easy. Much like any wash, you should always start with completely rinsing your car from top to bottom. Make sure you get to all the hard-to-reach areas as well as the more exposed areas that need cleaning. You can use a normal hose when washing.
One major precaution to keep in mind though is when you decide to use a power wash. It is advisable that you stay at least 6 inches away from the clear film to avoid damaging the film. As there is increased pressure involved with the use of a power wash, there is higher risk that it could damage your clear bra. This is especially true if you’re working around the edges of the vehicle bra – there will always be a chance that it might peel off.
This will lead to a larger number of problems like water deposits and dust build-up, so always take precaution. Treat this clear bra in Longwood, Florida with care and it shall serve you well.
Step 2: Wipe With Soap From the Middle and Work Away From the Edges
When rinsing is done, we move on to the next phase when it comes to maintaining the clear bra. As with any car cleaning process, after the preliminary rinsing, we may now begin to soap the film. Begin from the middle and make sure you work away from the edges to avoid soap suds from depositing and getting inside, as these will lead to unsightly black lines in the film.
Make sure you coat the surface or car protection cover for that matter. When you are finally sure that you’ve got every spot covered, you can then rinse off all the soap suds
Step 3: Begin to Dry and Hydrate With a Microfiber Towel
After rinsing off all the soap, you can begin to dry the vehicle bra with a microfiber towel. A microfiber towel is the best way to protect car paint and is also the best way to protect most clear bra kits, which are very prone to damage when it comes to the use of abrasive materials. To avoid any damage to the film, it is advisable that anyone who makes use of the clear film should use a microfiber towel whenever attempting to dry it.
Just as with soaping and rinsing, always be careful around the edges when wiping your car dry. To keep the best paint protection film at its peak condition, it is also in your best interests for you to make sure that you hydrate your vehicle bra. When choosing what product to use, make sure to check with your clear bra kit’s guidelines to learn what chemicals might damage it.
This is to ensure that you’re not risking your car film without even knowing it – this can be a double-edged sword, as not all cleaning products are suitable for all types of surfaces. Doing your research keeps your clear bra in Longwood, Florida in its best shape possible.
Step 4: Add Wax or Sealant to Accentuate the Aesthetics
To give your ride that needed bit of shine and extra protection from rainy days, adding wax or sealant will help with those. The right type of wax or sealant for your clear protective film will also provide the added benefit of prolonging your clear bra’s lifespan – and, in return, prolong your clear bra paint protection lifespan as well.
Waxing should be approached with even more caution than with washing and wiping. Waxing is used to protect and clean your clear bra, but it may also pose the same problems as to possibly peeling off the clear film but at a much higher rate of damage. It is advised that you avoid the edges when waxing or applying sealant to your clear bra kit – as wax or sealant with enough force at the wrong area may cause a lot of damage. This damage could be irreversible and render that investment in the clear bra price that you’ve paid for a waste.
Apply wax and make sure that you use the right brand; apply it with the right force, and be more careful when dealing with the edges. This, in turn, will make sure your clear bra in Longwood, Florida will stay as strong as it can possibly be.
Step 5: Remove the Wax or Sealant and Wipe With Microfiber Towel
The last bit of cleaning you will need to do is to remove the wax or sealant you just applied by wiping it off with a microfiber towel. Leaving on the wax or sealant in normal circumstances is understandable, but with your vehicle bra, this practice is not advisable.
When left too long, the chemicals will become corrosive and this will risk damage to the clear bra. Leaving chemicals on paint or clear bra kits altogether is not good practice, so make sure to wipe it off with a Microfiber Towel with care. The Microfiber Towel will not be abrasive.
When maintaining your clear bra, take the utmost care, and remember to use these 5 easy steps to ensure that your clear bra in Longwood, Florida lasts and looks good as long as possible. In return, you get the added benefit of protecting your car’s paint even longer. Think wisely and always remember to drive safely!